Let’s Discuss Your Project
Share your requirements with our team and discover the right
solution for your project needs.
solution for your project needs.
Walk in Stability Chamber
Pharmaceutical Walk-in Stability Chamber
Pharmaceutical Walk-in Stability Chamber is designed for controlled environmental testing of pharmaceutical products, formulations, and samples under defined temperature and humidity conditions. It supports reliable stability studies, shelf-life evaluation, and quality testing in pharmaceutical and laboratory applications.
Navsarjan Turnkey Solutions provides Walk-in Stability Chamber solutions engineered for consistent temperature and humidity control, helping laboratories maintain stable testing conditions. These chambers are suitable for pharmaceutical manufacturing, research laboratories, quality control, and product development applications.
Connect With Us
JDJ Instruments
- Photostability Chamber
- Walk in Cold Chamber Manufacturer
- Deep freezer
- Walk in Stability Chamber Manufacturer
- Stability & Humidity Chamber
- BOD Incubator Manufacturer
- Bacteriological Incubator
- Fully Automatic Vertical Autoclave
- Hot Air Oven
- Vacuum Oven
- Excellence Muffle Furnace Manufacturer
- Water Bath Rectangular Manufacturer
- 21 CFR PART 11 Compliance Software
CONSTRUCTION
- Pre- Fabricated Modular Panel Type Construction With PUF Insulation to be Assembled On Site With Floor Panels Having Extra reinforcement To Sustain The Movement And Sample Load Inside The chamber.
- The Inner Working Chamber is Water & Vapour Tight High- grade Stainless Steel.
- Heavy Duty Insulated Floor Panel With Anti skid Carpet For Secured Movement.
- Chamber Are Provided With Effective Air circulation System, Heating & Cooling System And humidity generator System.
DOOR
- Multi Pane Vacuum Sealed Observation Glass Window to view the Samples without Disturbing The test Condition & Human safety.
- Electronics & Mechanical Lock Provision is Provided For Door Access (Mechanical Lock: - For Safety reasons The door can Be Opened Form Inside Even If Locked From Outside.
RACKS (SAMPLE STORES)
- Heavy Duty Solid Stainless Steel Duly Electro Polished Wire Mesh/ Perforated Type Trays Are Provided Which Are Easy to clean, Time & Efforts saving, Also Adjustable for Convenience, Along With Detachable racks With Adjustable Angles.
UTILITY UNIT
- A Utility Unit is provided at the backside to the chamber, which consist of a cooling coil, dry heater and stream generator.
- The Air circulating Fan Motor is Placed On The top the conditioning unit. The Air is sucked in from The Ducting area Passes Over the cooling coil, Dry heater and Steam Generator then comes back into the working area.
- The same Air is Re-circulated again and again to give maximum uniformity of temperature and Humidity inside the chamber
CONTROL PANEL
- Ergonomically Designed control Panel Wiring With Systematic Sequential ferrule printing For input and output to all Components Like PLC, Contactors, Isolators, MCBs, SSRs. Easy Maintenance made Possible with the aid of Easy to Understand Wiring Diagrams.
- Advanced PLC Program with Built-in Processor based Auto tuning To achieve And maintain Constant Uniformity Of Set Condition.
- HMI Provided With Adequate Local Data Storage And A Colour TFT/LCD Display With Accurate Representation Of operating Condition In Contrasting Colours For easy Readability From A Considerable Distance.
| Model No. | Cap.in Liters | Internal Size in MM | Rack Qty. | Tray Qty. |
| JDJ/WSC-4K | 4000 | 2000Wx1000Dx2000H | 2 | 10 |
| JDJ/WSC-6K | 6000 | 2000Wx1500Dx2000H | 4 | 20 |
| JDJ/WSC-8K | 8000 | 2000Wx2000Dx2000H | 4 | 20 |
| JDJ/WSC-10K | 10000 | 2000Wx2500Dx2000H | 6 | 30 |
| JDJ/WSC-12K | 12000 | 2000Wx3000Dx2000H | 6 | 30 |
| JDJ/WSC-16K | 16000 | 2000Wx4000Dx2000H | 8 | 40 |
| JDJ/WSC-20K | 20000 | 2000Wx4000Dx2500H | 8 | 48 |
SAFETY FEATURES
- High Temperature safety cut off
- Low water level boiler cut off
- Emergency Stop
- Person Trapped Precaution
ALARM FEATURES
- Temperature & RH Deviation Alarm
- Continues Open Door Alarm
- Power Failure Alarm
OPTIONAL FEATURES
- Stand By Cooling System : - Completely Ready For Use Refrigeration System In case The Regular Refrigeration System Fails With Auto/Manual Change Over Through HMI.
- Stand By Humidity System :- Completely Ready For Use System In case The Regular System Fails With Auto/ Manual Change Over Through HMI.
- Door Access Controller :- Finger or Pin Based door access for opening Chamber
- Scanner :- (8 Temp. + 8 RH For Online Monitoring Purpose )
- Printer Interface Unit
- 21 CFR Software
TECHNICAL SPECIFICATIONS
- For conditions as Per ICH Guideline :- 25° C/60 %RH , 40°C/75% RH , 30°C/75% RH, 25°C/40% RH , 40°C/25% RH , 30°C/75% RH.
- Temperature Range :- 20°C – 60°C
- Accuracy / Uniformity :- ± 0.5°C / ± 2.0 °C
- Accuracy/ Uniformity : ± 1%RH/ ± 3%RH or better
- Humidity Range :- 40% RH – 95 % RH
- Accuracy / Uniformity :- ± 3% RH / ± 5% RH
- Control :- PLC With Auto tuning Facility For Accurate Control Of Temperature And Humidity Conditions.
- Sensor :- Rotronic OR Equivalent Make Sensor For Better Accuracy.
- Alarm :- Temperature Deviation & RH Devation Alarm, Power Failure Alarm, Continues Open Door Alarm Safety.
21 CFR Part 11 Compliance Software
- Real time Monitoring Of Temperature And Humidity
- Data base Management System As Per 21 CFR Guidelines
- Auto Backup And Manual backup Settable As Per Requirements
- Password management System as Per 21 CFR Guidelines
- Minimum Password Length
- Report Management System as per 21 CFR Guidelines
- Electronic Signature
- E- Signature For all Reports and Audit Trail.
- Master Temperature And Humidity
- Scanner Temperature And Humidity
- MKT, MKRH
- Log In And Log out
- Equipment Audit Trail
DOCUMENTATION
We qualify our instruments and provide detailed qualification reports as documented evidence of their suitability for the intended application.
CALIBRATION
We calibrate and certify our instruments in accordance with traceable standards, providing calibration certificates along with temperature and relative humidity mapping reports for the instruments.